Web Menu

Product Search

Language

Share

Wholesale Concrete Vibrator Hose/Concrete Vibrator Rod/Concrete Vibrator Shaft

Every step has witnessed our development.

Home / Product / Concrete vibrator / Wholesale Concrete Vibrator Hose/Concrete Vibrator Rod/Concrete Vibrator Shaft
  • Wholesale Concrete Vibrator Hose/Concrete Vibrator Rod/Concrete Vibrator Shaft
  • Wholesale Concrete Vibrator Hose/Concrete Vibrator Rod/Concrete Vibrator Shaft
Concrete vibrator

Wholesale Concrete Vibrator Hose/Concrete Vibrator Rod/Concrete Vibrator Shaft

The concrete vibrator is a mechanized tool for compacting concrete and is used in conjunction with a plug-in vibrator. When the concrete mixing 
machine mixes the concrete pouring components, the bubbles must be removed and tamped. The concrete vibrating rod can make the concrete densely combined, eliminate the honeycomb pockmark of the concrete, improve its strength, and ensure the quality of concrete components.
Use, maintenance and precautions of vibrating rod
1. Before use, please check that the vibrator is in good contact with the power supply and ensure the correct wiring. Only after selecting the correct running direction according to the signs, can the vibrator be connected.
2. If the vibrating rod does not vibrate after power-on, generally the tip of the vibrating rod can be knocked to the ground. After the vibrating rod emits 
a steady and powerful sound, the vibrating operation can be carried out.
3. When the vibrator is working, the vibrating rod should be inserted into the concrete vertically or obliquely, and the vibrating rod should move up and down during the ramming process.
4. In the case of a component or building layered pouring, when vibrating the next layer, the vibrating rod should be inserted into the vibrated layer to eliminate the interlayer joints and obtain the overall pouring effect.
5. After the vibrator has been working continuously for half an hour, it should be stopped for a period of time to prevent the machine from overheating and even damaging the parts.
6. In order to protect the service life of flexible shafts and hoses, the bending radius of the hose should be greater than 500mm during use.
7. After every 50-100 hours of use of the vibrating rod, all parts in the rod should be disassembled and cleaned. When disassembling, you can first unscrew the tip and hose connector (both are left-threaded), then use a wooden hammer to hit the roller one at the tip of the rod, take out the roller cone, bearing, oil seal, etc., and then remove the hose connector ( Right thread).
8. After cleaning, replace the damaged parts and reinstall. Except for bearings, all parts must be thoroughly cleaned of grease. The cone surface of the roller, 
the cone surface of the raceway and the inside of the casing should be absolutely oil-free and dry.
9. The threaded connection of the installed vibrating rod must be tightened. If necessary, add waterproof glue or raw tape to prevent water and mortar from
penetrating into the rod, causing the vibrating rod to not vibrate or vibrate weakly.
10. During the use of the vibrating rod, if it is found that the vibration is weak or not vibrating, the vibrating rod can be disassembled, and the damaged oil seals and bearings in the rod can be inspected and replaced, and the tapered surface of the casing, raceway and roller can be cleaned, It can be reassembled.
Contact Us
PREV：100% Copper Wire Electric Concrete Vibrator 220/380NEXT：Diesel/ Petrol Poker Concrete Vibrating Machine Insert Concrete Vibrator

  • Model

    JKV25

    JKV28

    JKV32

    JKV35

    JKV38

    JKV45

    JKV53

    JKV60

    JKV70

    Vibrating Head

    25

    28

    32

    35

    38

    45

    50

    60

    70

    Vibration

    Frequency(Hz)

    230

    230

    210

    200

    200

    200

    200

    200

    200

    Dia. of

    Flexible

    Hose(m

    Outside

    24

    25

    30

    30

    30

    32

    36

    36

    36

     

    Inner

    13

    14

    16

    16

    16

    18

    20

    20

    20

    Dia. of Flexible

    8

    8

    8

    10

    10

    12

    13

    13

    13

    Amplitude(mm)

    1.1

    1.11

    1.13

    1.15

    1.18

    1.2

    1.21

    1.28

    1.32

    Weight(kg)(6m)

    9.7

    10

    10.6

    14.6

    15.2

    17.5

    21.7

    22.7

    24.2

    Packing Size(cm)

    77*66*5.5

    77*66*7

    Coupling

    Chinese Type, Japanese Type, Malaysian Type, Australian Type, Turkish Type,

    Korean Type

Related Products

About Us

Qihangjia is a professional manufacturer of concrete vibrators,trowels, grinders, and cutting machines, exporting its products all over the world at very competitive prices.
Our product range includes concrete vibrators, vibration motors, trowels, grinders, cutting machines, and other essential industrial and construction equipment.
We have highly experienced sales teams, skilled technicians, and a dedicated after-sales service team, providing our customers with comprehensive, one-stop solutions.
At Qihangjia, our sales staff offer 24/7 one-stop service, covering everything from quotations and order fulfillment to inspection, certification, and freight arrangements.
Our commitment to quality is ensured by our experienced QC and QA teams, who implement strict quality control and inspection processes. Equipped with the latest technology, we deliver high-quality products and exceptional service, focusing on customer feedback to guarantee that all equipment is operating efficiently and correctly.
Our goal is to consider all customer concerns and provide them with the best possible products and solutions.

News

v